Product Details
This set has virtually everything you need to make paella.
This complete set includes:
- Model G400 Burner
- Reinforced Red Burner Tripod
- 20-inch Carbon Steel Paella Pan, 50cm
The model G400 burner has two concentric rings of flame and two knobs that independently control each ring. The outer ring is 16 inches, and the inner ring is 8 1/2 inches. You can use the inner ring by itself for 16-inch pans and smaller. Total BTU output is 38,800. Each ring is controlled by its own knob, so you can adjust the heat where and when it's needed. Our burners offer maximum control and flexibility, supplying even heat under the entire paella pan.
The reinforced tripod provides a convenient and stable way to lift the gas paella burner to table level. Each leg is 30 inches long. The legs slip onto the burner and are tightened with thumb screws (no screwdriver required), and you can easily adjust each leg to level the burner. This is a secure system that is speedy to assemble and disassemble.
The 20-inch carbon steel paella pan that is included with this set serves 6 to 10 people and is made of carbon steel, which is ideal for paella since it conducts heat quickly and evenly. The pan is thin but quite rigid and durable, with a hammered dimpled bottom. Carbon steel is the traditional material for paella, and some paella devotees feel that it enhances the flavor. As with any raw steel pan, it requires some care: you must dry the pan right after washing it and then rub the inside with a little vegetable oil to prevent rusting. If the pan does rust, a few passes with steel wool takes it right off.
All you need to start cooking is a propane tank and a regulator and hose to connect to the burner. We offer a compatible regulator and hose for this burner as a $6.95 optional add-on, much discounted from what you will find elsewhere..
This burner is for propane gas only.
We include an informative pamphlet with each pan, which contains two recipes, our tips for perfect paella, and care instructions.
