Double Flame Extra-Large Burner, Model L60 with Reinforced Tripod
This L60 model paella burner works with pans up to 32 inches in diameter. It is a step up from our G model burners because there is an additional ring to provide more heat. The burner rings are flat, and the flame holes are on the side of the ring, with a double row of flames on the innermost ring.
The diameters of the rings, measured from where the flames appear, are as follows: 3 1/2 inches, 8 1/4 inches, 15 1/2 inches, and 23 1/2 inches. The heat on the inner two rings is controlled by the same knob. The other two rings each have their own control knob. Total BTU output 87,800.
Our burners offer maximum control and flexibility, supplying even heat under the entire paella pan. Each ring is controlled by its own knob, so you can adjust the heat where and when it's needed.
The burner comes with a sturdy reinforced tripod that provides a convenient and stable way to lift our gas paella burners up to table level. Each leg is 30 inches long. The legs slip onto the burner and are tightened with thumb screws (no screwdriver required), and you can easily adjust each leg to level the burner. This is a secure system that is speedy to assemble and disassemble.
We include a complimentary regulator and hose with the burner to connect to your propane tank.
This burner is for propane gas only. For natural gas burner, click here.
